Beijing Silkscreen and Insulated Glass for Decoration Window Glass in China
Insulated glass/Hollow glass/IGU/Double glazing glass is made of two or more PCS of glass sheets and use sealant gumming glass PCS and aluminum spacers which was filled with desiccant together. Insulated glass/ Hollow glass/IGU/Double glazing glass with the perimeter of the spacer that gets in contact with the glass is properly sealed with primary and secondary sealants to ensure it is air tight.
| Name |
Tempered glass |
| Thickness |
3-25 mm |
| Normal Sizes |
250X250mm to 3300X18000mm |
| Quality Standard |
Comply with China GB11614-2009, Europe EN572 and Russia GOST 111-2001. |
| Description |
Tempered glass is produced by heating annealed glass in a furnace
to 620° . Progressing from the furnace, the glass is rapidly cooled
with jets of cold air, inducing compressive stresses to the surface while the center remains tensile. Stronger resistance to thermal breakage
than annealed or heat strengthened glass. If breakage occurs the
glass breaks up into small, cubical fragments, which are not
threatening to humans. |
Insulated glass/ Hollow glass/IGU/Double glazing glass Performance Features
1. The insulated glass/Hollow glass/IGU/Double glazing glass filled with the inert gas is excellent in heat and sound insulation, meeting the requirement for saving energy and environmental protection.
2. Hoarfrost and dew effect can be eliminated.
3. High wind pressure strength.
4. Not easy to be self exploded.
5. When choosing coated glass as the basal pieces, the coated layer will not come off.
Applications:
Insulated glass/ Hollow glass/IGU/Double glazing glass Applicable Range
The insulated glass/ Hollow glass/IGU/Double glazing glass is widely used in glass curtain walls, doors, windows and place with glass in automobile, ships, aircrafts and instruments.
Specifications:
Production Capability:
Insulated glass/ Hollow glass/IGU/Double glazing glass size:
Max: 2700mm*3700mm
Min: 350mm*180mm
Width of aluminum spacer: 6 mm, 9 mm, 12 mm, 15mm
Thickness: 5+6A+5~15+15A+15
Competitive Advantage:
Insulated glass/Hollow glass/IGU/Double glazing glass performance characteristics:
L. Thermal insulation: With low heat gain and heat loss value (low U value)
2. Light transmission: Appropriate level of solar transmission and solar reflectance can be selected to meet the design and functional requirement.
3. Noise insulation: IGU can reduce noise level by 30 dB. With inert gas in-filled, a 5 dB further reduction can be achieved.
4. Condensing prevention: The IG units are designed to withstand down to -65 without condensing, far exceeding the National Requirement of -40.
5. Leak-proof: To ensure the IGU air tight, automatic bending machine is used for all four corners bending, with use of linear connector for the spacer. A dual seal system is adopted with PIB as primary seal, and silicone or polysulfide as secondary seal. We use advanced fully automatic IG production line from Lisec of Austria, with automatic production operations covering spacer bending, filling of desiccant, edge deletion of coated glass, glass assembly, filling with inert gas and application of primary and secondary sealants.
Audited Supplier 
){kind=link}
){kind=link}