Heat Bent Glass (CTG)
Heat bent glass:
Specifications:
Min Radius: 400mm
Size 2000*1050mm, 1650*1300mm, 3300*2140mm, 400*400mm, r=400mm/600/800mm etc.
Thickness 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm, 20mm, 22mm, etc.
Parameters
1. Visible Light Transmittance ≥ 91%
2. Iron content: ≤ 120ppm Fe2O3
3. Density: 2.5g/CC
4. Yong's Module: 73Gpa
5. Tensile Strength: 42Mpa
Applications:
Heat bent glass is extensively used in shower door glass, fencing glass, revolving door glass, high quality furniture glass and architectural situations
Competitive Advantage:
1. Good accuracy in arc, less light aberration.
2. Safety, mechanical attack resistance performance and thermal stability.
3. Anti-wind pressure ability and deflection performance.
1. The anti-impacting performance and anti-bending performance of curved tempered glass/heat bent glass are 3-5 times higher than ordinary glass.
2. Curved tempered glass/heat bent glass breaks into granules in case of strongly knocked, so no hurt would be caused.
3. Deflection angle of curved tempered glass/heat bent glass is 3-4 times larger than that of float glass with same thickness. When there is load on curved tempered glass/heat bent glass, its maximum tensile stress does not locate on the glass surface as float glass, but on the central point of glass sheet.
Heat bent glass features:
Safety performance: Heat bent glass/curved glass/bended glass will appear hurtless obtuse angles when breakage.
Strength performance: Four times more than ordinary glass.
Heat stability: Three times more than ordinary glass, could bear temperature change about 200 ° C.
Certificates:
Factory situation:
){kind=link}